manualshive.com logo in svg

Cisco MCS-7825-H1-IPC1, Руководство по установке

Поделиться
Скачать
Cisco MCS-7825-H1-IPC1 Скачать руководство пользователя страница 50

B-4

Installation and Upgrade Guide for Cisco Unified Presence Release 8.0 and 8.5

Appendix B      Upgrading Cisco Unified Presence

    How to Perform Intercluster Upgrades

Retrieving the Remote Patch

Procedure

Step 1

Enter the location and sign in information for the remote file server. 

Step 2

Select the upgrade patch that you want to install, after the system connects to the remote server and 
retrieves a list of available upgrade patches. The system downloads, unpacks, and installs the patch and 
then restarts the system.

Related Topics

Configuring the Basic Installation, page 3-4

How to Perform Intercluster Upgrades

This section is applicable to the following Cisco Unified Presence intercluster upgrades:

•

Cisco Unified Presence Release 7.x to Release 8.0(x) 

•

Cisco Unified Presence Release 7.x to Release 8.5(x) 

•

Prerequisites for an Intercluster Upgrade, page B-4

•

Roster Migration for Intercluster Upgrade, page B-5

•

Contact List Size for Intercluster Upgrade, page B-5

•

SIP Remote Contact Limit, page B-5

•

Performing an Intercluster Upgrade, page B-6

Prerequisites for an Intercluster Upgrade

Before you perform the software upgrade to Cisco Unified Presence Release 8.x, we highly recommend 
that you turn off (deactivate) the Cisco UP Presence Engine service in the local Cisco Unified Presence 
cluster. 

If you intend to upgrade all clusters to Release 8.x, you should turn off (deactivate) the Cisco UP 
Presence Engine on 

all

 clusters until you complete the intercluster upgrade in your intercluster 

deployment. Once you complete the upgrades in your deployment, verify the status of the intercluster 
peer connections are ok, and there are no pending system notifications. You can then turn on (activate) 
the Cisco UP Presence Engine on all nodes in all clusters. You may experience high CPU (possibly for 
several hours) while the Cisco UP Presence Engine attempts to reestablish any presence subscriptions 
with remote contacts.

If you intend to leave an intercluster peer on Release 7.0(x), verify the status of the intercluster peer 
connections are ok. Enable the Cisco UP XCP SIP Federation Connection Manager service before you 
turn on (activate) the Cisco UP Presence Engine service, as described in the intercluster upgrade 
procedure 

Performing an Intercluster Upgrade, page B-6

. You may experience high CPU (possibly for 

several hours) while the Cisco UP Presence Engine attempts to reestablish any presence subscriptions 
with remote contacts.

For intercluster presence to work between a Cisco Unified Presence Release 7.0(x) cluster and a 
Cisco Unified Presence Release 8.0(x), the proxy service parameter RecordRoute should be enabled.

Содержание MCS-7825-H1-IPC1























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды