Cisco Linksys RV016 Скачать руководство пользователя страница 55

Страница: 55 / 112

Chapter 4

Advanced Configuration

10/100 16-Port VPN Router

shared keys. There are three groups of different prime

key lengths. Group 1 is 768 bits, and Group 2 is 1,024 bits.

Group 5 is 1,536 bits. If network speed is preferred, select

Group 1

. If network security is preferred, select

Group 5

Phase 1 Encryption

Select a method of encryption:

DES

(56-bit),

3DES

(168-bit),

AES-128

(128-bit),

AES-192

(192-bit), or

AES-256

(256-bit). The method determines

the length of the key used to encrypt or decrypt ESP

packets. AES-256 is recommended because it is more

secure. Make sure both ends of the VPN tunnel use the

same encryption method.

Phase 1 Authentication

Select a method of

authentication,

MD5

SHA

. The authentication method

determines how the ESP packets are validated. MD5 is

a one-way hashing algorithm that produces a 128-bit

digest. SHA is a one-way hashing algorithm that produces

a 160-bit digest. SHA is recommended because it is more

secure. Make sure both ends of the VPN tunnel use the

same authentication method.

Phase 1 SA Life Time

Configure the length of time a VPN

tunnel is active in Phase 1. The default value is

28800

seconds.

Perfect Forward Secrecy

If the Perfect Forward Secrecy

(PFS) feature is enabled, IKE Phase 2 negotiation will

generate new key material for IP traffic encryption and

authentication, so hackers using brute force to break

encryption keys will not be able to obtain future IPSec

keys.

Phase 2 DH Group

If the Perfect Forward Secrecy feature

is disabled, then no new keys will be generated, so you do

not need to set the Phase 2 DH Group (the key for Phase 2

will match the key in Phase 1).
There are three groups of different prime key lengths.

Group 1 is 768 bits, and Group 2 is 1,024 bits. Group 5 is

1,536 bits. If network speed is preferred, select

Group 1

If network security is preferred, select

Group 5

. You do

not have to use the same DH Group that you used for

Phase 1.

Phase 2 Encryption

Phase 2 is used to create one or

more IPSec SAs, which are then used to key IPSec sessions.

Select a method of encryption:

NULL

DES

(56-bit),

3DES

(168-bit),

AES-128

(128-bit),

AES-192

(192-bit), or

AES-256

(256-bit). It determines the length of the key used to

encrypt or decrypt ESP packets. AES-256 is recommended

because it is more secure. Both ends of the VPN tunnel

must use the same Phase 2 Encryption setting.

Phase 2 Authentication

Select a method of

authentication,

NULL

MD5

, or

SHA

. The authentication

method determines how the ESP packets are validated.

MD5 is a one-way hashing algorithm that produces a

128-bit digest. SHA is a one-way hashing algorithm that

produces a 160-bit digest. SHA is recommended because

it is more secure. Both ends of the VPN tunnel must use

the same Phase 2 Authentication setting.

Phase 2 SA Life Time

Configure the length of time a VPN

tunnel is active in Phase 2. The default is

3600

seconds.

Preshared Key

This specifies the pre-shared key used

to authenticate the remote IKE peer. Enter a key of

keyboard and hexadecimal characters, e.g., My_@123

or 4d795f40313233. This field allows a maximum of 30

characters and/or hexadecimal values. Both ends of

the VPN tunnel must use the same Preshared Key. It is

strongly recommended that you change the Preshared

Key periodically to maximize VPN security.

Manual

If you select Manual, you generate the key yourself, and

no key negotiation is needed. Manual key management is

used in small static environments or for troubleshooting

purposes.

Keying Mode > Manual (Tunnel Only)

Incoming and Outgoing SPI (Security Parameter

Index)

SPI is carried in the ESP (Encapsulating Security

Payload Protocol) header and enables the receiver and

sender to select the SA, under which a packet should be

processed. Hexadecimal values is acceptable, and the

valid range is 100~ffffffff. Each tunnel must have a unique

Incoming SPI and Outgoing SPI. No two tunnels share the

same SPI. The Incoming SPI here must match the Outgoing

SPI value at the other end of the tunnel, and vice versa.

Encryption

Select a method of encryption,

DES

3DES

This determines the length of the key used to encrypt or

decrypt ESP packets. DES is 56-bit encryption and 3DES

is 168-bit encryption. 3DES is recommended because it is

more secure. Make sure both ends of the VPN tunnel use

the same encryption method.

Authentication

Select a method of authentication,

MD5

SHA1

. The Authentication method determines how

the ESP packets are validated. MD5 is a one-way hashing

algorithm that produces a 128-bit digest. SHA is a one-way

hashing algorithm that produces a 160-bit digest. SHA1

is recommended because it is more secure. Make sure

both ends of the VPN tunnel use the same authentication

method.

Encryption Key

This field specifies a key used to encrypt

and decrypt IP traffic. Enter a key of hexadecimal values.

Содержание Linksys RV016

















































































































Результаты поиска

Содержание Linksys RV016

Отзывы:

Похожие инструкции для Linksys RV016

Бренды по названию

Популярные бренды

Cisco Linksys RV016, Руководство пользователя

Результаты поиска

Содержание Linksys RV016

Отзывы:

Похожие инструкции для Linksys RV016

Бренды по названию

Популярные бренды