![background image](http://html.mh-extra.com/html/cisco/firepower-1120/firepower-1120_hardware-installation-manual_63641079.webp)
7-3
Cisco 1120 Connected Grid Router Hardware Installation Guide
OL-26438-02
Chapter 7 About Connected Grid Modules
Installing Modules in the Router
Install Modules
Tip
This section provides general module installation steps. For detailed steps for the module type that you
are installing, see the installation and configuration guide for your module at:
www.cisco.com/go/cgr1000-docs.
To install a module in an available router slot, follow these steps:
Step 1
Power down the router as described in the router hardware installation guide on Cisco.com, at:
www.cisco.com/go/cgr1000-docs.
Step 2
Insert the module in the slot as shown in
Figure 7-1
.
Step 3
Using a screwdriver, secure the module captive screws (two per module) into the connectors on the router
front panel.
Step 4
Power on the router as described in the router hardware installation guide on Cisco.com, at:
www.cisco.com/go/cgr1000-docs.
Figure 7-1
Insert Modules into Router
3-Phase AC Power
Single-Phase AC Power
302223
1
2
3
1
2
3
4
5