3-20
Cisco 1120 Connected Grid Router Hardware Installation Guide
OL-26438-02
Chapter 3 Router Hardware Description
Hardware Features
Specifications
Related Commands
Use the commands in this section to see the GPS current time and location.
Use the
show gps time
command to display the current GPS time:
cgr-1000#
show gps time
8:46:9.923 UTC Fri Sep 11 2011
Use the
show gps location
command to display the GPS latitude and longitude:
cgr-1000#
show gps location
Latitude: 37.4090637
Longitude -121.9523598
Short-Range Access Point
The router features an integrated, short-range WiFi access point to support a wireless connection to the
router, over which you can administer the router. The router can be installed in a utility box or substation;
the wireless connection enables you to manage the router from outside these enclosures.
The WiFi connection is available only when the system software is operating. If the system software is
not operating, you cannot use the WiFi connection to connect to or administer the router.
Related Commands
To display WiFi configuration information, enter any or all of the following commands:
•
show interface wifi
slot/port
[associations | brief | description | statistics]
–Summarizes the status
of the interface as up or down, the five second input and output rate and the number of input and
output packets. Additionally, the Cisco CG-OS router displays hardware details such as radio type
(802.11N, 2.4 GHz radio), MAC address and MTU setting.
•
show controller wifi
slot/por
t–Displays serial number, software version, and configured frequency
and power settings
For detailed information about these commands, see the chapter “Configuring the WiFi Interface” in the
Cisco 1000 Series Connected Grid Routers WiFi Software Configuration Guide
, at
www.cisco.com/go/cgr1000-docs.
Specification
Description
Channels
12
Tracking sensitivity
-160 dBm
Acquisition sensitivity
-148 dBm
Fast TTFF (Cold start)
38 sections
Error correction
Space Based Augmentation Systems (SBAS)
