C H A P T E R
6-1
Cisco 1120 Connected Grid Router Hardware Installation Guide
OL-26438-02
6
Making Network Connections
This chapter describes how to connect network and other connections when installing the Cisco 1120
Connected Grid Router, and includes the procedures for basic router network connections and for
optional installation steps. The procedures you follow depend on your network environment and
requirements. This chapter contains the following sections:
•
Before Installing, page 6-1
•
Basic Network Connections, page 6-2
•
Additional Router Connections, page 6-7
•
Installing Modules and Antennas, page 6-13
Note
This chapter describes router installation procedures. For detailed, technical information about the router
hardware, including hardware specifications and connector and cable descriptions, see the
Router
Hardware Description
chapter and the
Connector and Cable Specifications
appendix.
Before Installing
Before following any installation procedures in this chapter, read the following topics in this section:
•
Installation Site Preparation, page 6-1
•
Installation Safety Information, page 6-2
•
Connecting the Router to Power, page 6-2
•
Preventing Electrostatic Discharge Damage, page 6-2
•
Cabling Guidelines, page 6-2
Installation Site Preparation
The procedures in this chapter assume that you have prepared the installation site according to the
information in the
Installation Safety and Site Preparation
chapter.