Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Руководство по настройке

Страница: 349 / 432

C-157
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Appendix C Command Summary
Configuration Command Set
Syntax Description
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to remove the specified log-url server from the
list. Only one log-url server can be configured.
remoteport
Specifies the TCP service port through which non-secure connections is sent.
remoteport <port|default>
Syntax Description
Caution
Traffic sent on this TCP service port is not secured by SSL during
transmission to the server. It must be secured by another means.
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
Related Commands
localport (Server Configuration Command Set)
sslport (Server Configuration Command Set)
ipaddr The IP address of the device to receive log-url
messages.
port Keyword indicating that a specific TCP port should be
used for communications.
portid The TCP port to be used.
facility Keyword indicating a specific facility should be used.
facilityid A numeral (from 0 to 7, inclusive) specifying the
facility to be used.
port The non-secure port used to send clear text traffic to
the server.
default Sets the non-secure port specification to 80.