Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Руководство по настройке

Страница: 221 / 432

C-29
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Appendix C Command Summary
Top Level Command Set
See the sections “SSL Configuration Command Set”, “Certificate Configuration
Command Set”, and “Certificate Group Configuration Command Set”.
show ssl errors
Displays SSL errors reported on the device.
show ssl errors [continuous] [interval <value>]
Syntax Description
Usage Guidelines Availability: Serial, Telnet; FIPS Mode (serial only)
(This command must be given on one line.) Displays SSL errors reported on a
single device or module. Use the continuous keyword to update the statistics
every second. Use the interval keyword to specify an interval for display updates,
where value is the interval in seconds. Press any key to stop displaying errors.
Table C-3 displays output descriptions.
continuous Displays errors continuously.
interval Specifies an interval for display updates.
value The interval in seconds.
Table C-3 Output Description for show ssl errors
Error Description
SSL Negotiation Errors The number of SSL negotiation failures
Total SSL Connections Rejected The number of SSL connections rejected
when the pre-defined limit of connections has
been exceeded