Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Руководство по настройке

Страница: 374 / 432

Appendix C Command Summary
Configuration Command Set
C-182
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
The default 1 enables time stamping. This option allows the sender to include a
time stamp in every segment. The receiver should acknowledge (or echo) this
stamp so that the sender can use delta for round trip time calculations. Using this
option increases the TCP header from 20 bytes to 32 bytes. Use the no form of the
command to return the ts to the global value. If no global settings exist for a
parameter, the factory default parameter is used instead. See RFC 1323.
wnd-scale
Controls use of the time stamp TCP option.
wnd-scale <0|1|on|off|default>
no wnd-scale
Syntax Description
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
The default 1 increases the TCP window from 16 bits to 32 bits. The header size
is not changed, but by enabling the option TCP maintains the windows internally
as a 32-bit value. Having this option enabled can accommodate larger receive
buffers (> 65535) by allowing for significantly larger windows, potentially
increasing the overall efficiency of communications. Use the no form of the
command to return the ts to the global value. If no global settings exist for a
parameter, the factory default parameter is used instead. See RFC 1323.
0 TCP window size is 16 bits.
1 TCP window size is 32 bits.
on TCP window size is 32 bits.
off TCP window size is 16 bits.
default 1 (on); TCP window size is 32 bits.