Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Руководство по настройке

Страница: 371 / 432

C-179
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Appendix C Command Summary
Configuration Command Set
As packets are retransmitted following lack of acknowledgements, the rto will
continue to increase until it reaches this value. This value should be set greater
than the rto-def value. Setting this value too low on high latency networks (e.g.,
slow WAN links) can adversely affect performance. Use the no form of the
command to return the rto-max to the global value. If no global settings exist for
a parameter, the factory default parameter is used instead. See RFC 1122 and
RFC 2988.
Related Commands
rto-def (TCP Tuning Configuration Command Set)
rto-min (TCP Tuning Configuration Command Set)
rto-min
Specifies the minimum allowable roundtrip timeout (rto) value.
rto-min <milliseconds|default>
no rto-min
Syntax Description
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
This value should be set to less than the rto-def value. Use the no form of the
command to return the rto-min to the global value. If no global settings exist for
a parameter, the factory default parameter is used instead. See RFC 1122 and
RFC 2988.
Related Commands rto-def (TCP Tuning Configuration Command Set)
rto-max (TCP Tuning Configuration Command Set)
milliseconds The default number of milliseconds before
retransmitting; the valid range is from 1 to the rto-def
value milliseconds (inclusive).
default The factory default. At the time of publication, the
factory default is 100 milliseconds.