Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Руководство по настройке

Страница: 293 / 432

C-101
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Appendix C Command Summary
Configuration Command Set
Related Commands
show ssl (Non-Privileged Command Set)
show ssl server (Non-Privileged Command Set)
See the section “Reverse-Proxy Server Configuration Command Set”.
secpolicy
Creates and/or configures the specified security policy and enters Security Policy
Configuration mode for the security policy.
secpolicy <polname> [create]
no secpolicy <polname>
Syntax Description
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
The no form of the command is used to remove a security policy. You cannot
delete a security policy referenced by a logical secure server. Security policy
names can consist of Arabic numerals and upper- and lowercase alphabetic,
underscore (_), hyphen (-), and period (.) characters. Security policy names must
begin with an alphabetic character or underscore and have a limit of 15 characters.
Examples
The following example creates a security policy named mypolicy and enters
Security Policy Configuration mode for the security policy mypolicy.
secpolicy mypolicy create
Related Commands
show ssl secpolicy (Non-Privileged Command Set)
See the section “Security Policy Configuration Command Set”.
polname The name of the security policy.
create Creates a new security policy named polname and
enters Security Policy Configuration mode for that
object.