Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Руководство по настройке

Страница: 357 / 432

C-165
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Appendix C Command Summary
Configuration Command Set
urlrewrite
Sets or remove a specified URL rewrite rule for the current secure server.
urlrewrite <domainName> [sslport <portid>] [clearport <portid>]
<redirectonly>
no urlrewrite <domainName>
Syntax Description
Usage Guidelines Availability: Serial, Telnet; FIPS Mode (serial only)
An * (asterisk) wild card character can be used to specify more than one server in
a single domain, e.g., “*.company.com”. Up to 32 URL rewrite rules can be
configured. Use the no form of the command to clear the specified rule. If more
transparent local-listen The device listens on the device’s IP address for
incoming client connections and uses the client’s
IP address for connecting to the hardware server.
no transparent The device listens on the device’s IP address for
incoming client connections and uses the
device’s IP address for connecting to the
hardware server.
Command Behavior
domainName The domain or file identifier as a domain name, IP
address, or path and file name.
sslport A keyword identifying the following portid to be used
for SSL traffic.
portid The TCP service port to be used for SSL traffic.
clearport A keyword identifying the following portid to be used
for clear text traffic.
portid The TCP service port to be used for clear text traffic.
redirectonly A keyword is used to indicate that only the
“Location;” field in the HTTP 30x redirect header
should be rewritten. This solves a common problem
with Web servers using insecure HTTP 30x redirects.