Cisco CS-MARS-20-K9 - Security MARS 20, Руководство пользователя

Страница: 396 / 588

20-4
User Guide for Cisco Security MARS Local Controller
78-17020-01
Chapter 20 Queries and Reports
Queries
To submit your query as a batch query, click Submit Batch . Your query is submitted, and you are
automatically taken to the Batch Query tab.
Figure 20-7 Select Batch Query
Step 3
To watch the status of the query in real-time, you can use the drop-down list to change the Page Refresh
Rate from Never (the default) to 1 minute, 3 minutes, 5 minutes, 10 minutes, 15 minutes, or 30 minutes.
Step 4 To view the results of the batch query as it is running, click View Results . This can be done while the
query is in progress.
If the email address in your user profile on the MARS is valid, the results of your batch query are emailed
to you when the query has completed, and can also be viewed by clicking
QUERY / REPORTS > Batch
Query > View Results .
Note
When you click View Results while the query is in progress, the results compiled up to that moment are
recomputed. This can make the display take longer to appear than after the results are compiled.
To Stop a Batch Query
Step 1
Click QUERY/REPORTS , then click the Batch Query tab.
Step 2
Click Stop . The Status of the query changes to Finished .
To Resubmit a Batch Query
You can resubmit a batch query if you want to restart it. A resubmitted batch query will use previously
computed results, thus resulting in a faster query than one submitted for the first time.
Step 1
Click QUERY/REPORTS , then click the Batch Query tab.
Step 2 Click Resubmit . The Status of the query changes to In Progress .