Cisco CS-MARS-20-K9 - Security MARS 20, Руководство пользователя

Страница: 222 / 588

6-32
User Guide for Cisco Security MARS Local Controller
78-17020-01
Chapter 6 Configuring Network-based IDS and IPS Devices
NetScreen IDP 2.1
Step 3
From the main menu, click Tools > Preferences .
Step 4 In the tree on the left, click Management Server , enter the Local Controller’s address in the Syslog host
field, and click OK .
Step 5
Click Security Policies , and the name of your policy.
Step 6 In the Notification column, right-click anywhere in the cell in the field and select Configure .
Step 7
Check enable logging and syslog for each policy, and click OK . Repeat for all of your policies.
Step 8 From the main menu, click Policy > Install .
MARS-side Configuration
Add Configuration Information for the IDP
Step 1
Click Admin > System Setup > Security and Monitor Devices > Add .
Step 2 From the Device Type list, select Add SW Security apps on a new host or Add SW security apps on
existing host.
Step 3
Enter the Device Name and IP Addresses if adding a new host.
Step 4
Click Apply .
Step 5
Click Reporting Applications tab.
Step 6 From the Select Application list, select NetScreen IDP 2.1 .
Step 7
Click Add .
Figure 6-17 Add NetScreen IDP 2.1 Sensors
Add NetScreen IDP 2.1 Sensors Manually
Step 1 Click Add Sensor .
Step 2
Select existing device or Add New device.
Step 3 Enter the Device Name , Sensor Name , and its Reporting IP address.
•
Device Name – the DNS entry for this device