manualshive.com logo in svg

Cisco CS-MARS-20-K9 - Security MARS 20, Руководство пользователя

"Пользовательское руководство для Cisco CS-MARS-20-K9 - Security MARS 20 доступно для бесплатного скачивания с manualshive.com. Этот manual предоставит вам всю необходимую информацию для правильной установки и использования продукта. Скачайте ваш экземпляр прямо сейчас!"

Поделиться
Скачать
background image

 

4-56

User Guide for Cisco Security MARS Local Controller

78-17020-01

Chapter 4      Configuring Firewall Devices

Check Point Devices

Step 7

Click 

Submit

 to remove the child enforcement module from the primary management station.

Troubleshooting MARS and Check Point

The following information can be used to troubleshoot communicate issues between the MARS 
Appliance and Check Point components.

•

To view attack information by user, run a query where the device is a Check Point device.

•

If you attempt to discover the certificate and it returns to the CheckPoint Certificate screen instead 
of displaying the “Discovery done.” message box, then the discover operation failed. The likely 
cause is an incorrect SIC value. 

Note

A certificate can be pulled only once for an OPSEC Application. If for any reason the pull 
operation fails, you must reset the certificate using the CheckPoint SmartDashboard. For more 
information, see 

Reset the OPSEC Application Certificate of the MARS Appliance, page 4-36

.

•

If the device discovery operation fails, click the 

View Error

 button for a detailed error message.

Common reasons for failure of device discovery are as follows:

•

client SIC DN name or server SIC DN name is incorrect. Use copy and paste from SmartDashboard 
to avoid erroneous entry.

•

Invalid Certificate used.

•

Invalid user name, password, or both used. Verify that the credentials provided for the Access IP 
match an Check Point account with administrative privileges.

•

Unsupported version of Check Point. (Discovery works only with NG FP3 and above. Internally we 
have tested up to Version R60)

•

Invalid authentication method used. The default method is SSLCA. Check the 

fwopsec.conf

 file to 

determine which method is used. CS-MARS currently support only three authentication methods for 
CPMI communication: SSLCA, ASYM_SSLCA and CLEAR. For more information on specifying 
these settings, see 

Select the Access Type for LEA and CPMI Traffic, page 4-32

.

•

Invalid access port. Default port for secured CPMI-based communication is TCP 18180. Check the 

fwopsec.conf

 to verify the configured port.

•

The MARS Appliance does not have access to port 18190, or an alternate specified in 

fwopsec.conf

 

for CPMI. At the CLI of the MARS Appliance, use the 

telnet

 command to test the access port. For 

more information on 

telnet

, see 

Verify Communication Path Between MARS Appliance and Check 

Point Devices, page 4-36

.

•

The policy database was not installed after creating OPSEC Application in the SmartDashboard.

•

Firewall policies were not created and installed that permitted the MARS Appliance to connect to 
the Check Point primary management station. For information, see 

Create and Install Policies, page 

4-34

.

For additional Check Point discovery-related debug information, use the 

pnlog

 command at the CLI of 

the MARS Appliance. You can use the cpdebug attribute to specify appropriate debug level. Level 9 
presents all debug messages. You can view the debug messages using the 

pnlog showlog cpdebug

 

command at the CLI. For more information on 

pnlog

, see 

pnlog, page A-30

 in the 

Install and Setup 

Guide for Cisco Security Monitoring, Analysis, and Response System

.

Содержание CS-MARS-20-K9 - Security MARS 20













































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CS-MARS-20-K9 - Security MARS 20

XBOX 360 Quick Manual preview
360
Бренд: XBOX Страницы: 2
Danfoss VLT series Quick Manual preview
VLT series
Бренд: Danfoss Страницы: 37
Daikin MicroTech II Operation And Maintenance Manual preview
MicroTech II
Бренд: Daikin Страницы: 44
UCS CAT Quick Start Manual preview
CAT
Бренд: UCS Страницы: 4
Hama Thunder V18 Instruction Manual preview
Thunder V18
Бренд: Hama Страницы: 12
Hama Thunder V18 Operating Instruction preview
Thunder V18
Бренд: Hama Страницы: 12
Hama Mini V3 Rumble Operating Instruction preview
Mini V3 Rumble
Бренд: Hama Страницы: 14
Hama Dual Vibration Operating Instruction preview
Dual Vibration
Бренд: Hama Страницы: 8
HANYOUNG NUX TS500 Manual preview
TS500
Бренд: HANYOUNG NUX Страницы: 56
Madas M16/RMO NA/NC Installation Instructions Manual preview
M16/RMO NA/NC
Бренд: Madas Страницы: 6
Madas EVP/NC Manual preview
EVP/NC
Бренд: Madas Страницы: 11
R82 Cricket User Guidance preview
Cricket
Бренд: R82 Страницы: 89
National Instruments NI cRIO-9036 User Manual preview
NI cRIO-9036
Бренд: National Instruments Страницы: 40
National Instruments cRIO-9063 Manual preview
cRIO-9063
Бренд: National Instruments Страницы: 28
National Instruments NI PXI-8104 Installation Manual preview
NI PXI-8104
Бренд: National Instruments Страницы: 7
National Instruments NI PXI-8840 Getting Started Manual preview
NI PXI-8840
Бренд: National Instruments Страницы: 22
Oceanic DX1 Product Service Manual preview
DX1
Бренд: Oceanic Страницы: 11
Patron TOM 5 Information For Use preview
TOM 5
Бренд: Patron Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды