19-21
User Guide for Cisco Security MARS Local Controller
78-17020-01
Chapter 19 Incident Investigation and Mitigation
Layer 2 Path and Mitigation Configuration Example
–
For
Enable Password
, enter the password to get into Cisco enable mode.
–
Enter its
SNMP RO Community
.
TELNET
:
–
For the
Login
ID, enter the user name and
Password
needed to access the switch.
–
For
Enable Password
, enter the password to get into Cisco enable mode.
–
Enter its
SNMP RO Community
.
Step 5
Click the
Test Connectivity
button to have the MARS discover the device.
Step 6
Click the
Submit
button.
Add the Cisco 7500 Router with TELNET as the Access Type
Step 1
Click
Admin
>
Security and Monitor Devices
>
Add
.
Figure 19-17
Configure Cisco IOS 12.2
Step 2
From the
Device Type
drop-down list, select
Cisco Switch-IOS 12.2
.
Step 3
Enter the
Device Name
of the switch.
Step 4
Enter the
Access IP
address (optional) and
Reporting IP
address of the switch. The
Reporting IP
address is usually the same as the
Access IP
address, but if you are creating an FTP device it must be a
different IP address.
If you have entered an Access IP address, from the
Access Type
pull-down menu, select
FTP
:
Содержание CS-MARS-20-K9 - Security MARS 20
Страница 20: ...Contents xx User Guide for Cisco Security MARS Local Controller 78 17020 01 ...
Страница 356: ...17 16 User Guide for Cisco Security MARS Local Controller 78 17020 01 Chapter 17 Network Summary Summary Page ...
Страница 420: ...20 28 User Guide for Cisco Security MARS Local Controller 78 17020 01 Chapter 20 Queries and Reports Reports ...
Страница 580: ...Glossary GL 4 User Guide for Cisco Security MARS Local Controller 78 17020 01 ...