C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Terminal Services Commands on Cisco IOS XR Software
send
SMR-701
Cisco ASR 14000 Series Router System Management Command Reference
OL-17231-01
send
To
send messages to one or all terminal lines, use the
send
command in EXEC mode.
send
{
*
|
line-number
|
aux 0
|
console 0
|
vty
number
}
Syntax Description
Defaults
No default behavior or values
Command Modes
EXEC
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The system prompts for the message, which can be up to 500 characters long. Enter
Ctrl-Z
to end the
message. Enter
Ctrl-C
to abort this command.
Task ID
Examples
The following example shows how to send a message to all lines:
RP/0/RP0/CPU0:router#
send
*
Enter message, end with CTRL/Z; abort with CTRL/C:
The system will be shut down in 10 minutes for repairs.^Z
Send message? [confirm]
RP/0/RP0/CPU0:router#
***
***
*** Message from tty to all terminals:
***
The system will be shut down in 10 minutes for repairs.
*
Sends a message to all tty lines.
line-number
Line number to which the message is sent. A number from 0 to 101.
aux
0
Sends a message to the auxiliary line.
console 0
Sends a message to the console line.
vty
number
Sends a message to a virtual terminal line (vty). Range is 0 to 99.
Release
Modification
Release 3.7.1
This command was introduced on the Cisco ASR 14000 Series Router.
Task ID
Operations
tty-access
read, write
