C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Process and Memory Management Commands on Cisco IOS XR Software
placement program
SMR-530
Cisco ASR 14000 Series Router System Management Command Reference
OL-17231-01
placement program
To enter placement program configuration mode to set process affinities (preferences), use the
placement program
command in global configuration mode. To remove the assigned process
placement, use the
no
form of this command.
placement program
{
program
[
instance
instance
]
| default
}
no placement program
program
{
instance
instance
|
default
}
Syntax Description
Defaults
No default behavior or values
Command Modes
Global configuration
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The
placement program
command allows you to change the placement policy for any placeable
process, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP).
Placement policy consists of two types: resource consumption and affinities. Resource consumption
involves CPU and memory usage and is a “hard” resource requirement. Affinities are preferences, and
are considered “soft” requirements for a placement policy. Only affinities can be configured by the
operator.
The
placement program
command handles configuration for these affinity types:
•
Affinity location set
•
Affinity location type
•
Affinity program
•
Affinity self
•
Affinity existence
To obtain a list of running placeable processes and placement policy parameters on your router system,
use the
show placement policy
command.
program
Process or group of processes.
instance
instance
Specifies a program name that uniquely identifies a placement process.
The process name is any alphanumeric string no longer than 40
characters.
default
Specifies all processes instead of a specific process instance.
Release
Modification
Release 3.7.1
This command was introduced on the Cisco ASR 14000 Series Router.
