Cisco ASR 14000 Series, Справочник команд управления

Страница: 471 / 782

C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Object Tracking Commands in Cisco IOS XR Software
clear vrf (track)
SMR-469
Cisco ASR 14000 Series Router System Management Command Reference
OL-17231-01
clear vrf (track)
To clear entry of a VRF table as a basis to track route reachability, use the clear vrf command in route
tracking configuration mode.
clear vrf { vrf-table-name }
Syntax Description
Defaults No default behavior or values
Command Modes Route tracking configuration
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The clear vrf command is accessed through route tracking configuration submode.
Task ID
Examples The following example shows the use of the clear vrf command:
RP/0/RP0/CPU0:router# configuration
RP/0/RP0/CPU0:router(config)# track name1
RP/0/RP0/CPU0:router(config-track)# type route reachability
RP/0/RP0/CPU0:router(config-track)# clear vrf vrf-table-name
Related Commands
vrf-table-name Name of the VRF table used for route reachability tracking.
Release Modification
Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router.
Task ID Operations
sysmgr read, write
Command Description
track Initiates or identifies a tracking process to track the status of an object; also
enters track configuration mode.
type route reachability Configures tracking based on whether or not a route is part of a particular
routing table.
vrf (track) Configures that a VRF table should be used as the basis to track route
reachability.