C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Software Package Management Commands on Cisco IOS XR Software
install rollback to
SMR-372
Cisco ASR 14000 Series Router System Management Command Reference
OL-17231-01
install rollback to
To roll back the software set to a saved installation point or to the last committed installation point, use
the
install rollback to
command in EXEC or administration EXEC mode.
Administration EXEC Mode
install rollback to
{
point-id
|
label
|
committed
} [
auto-abort-timer
time
] [
sdr
OWNER
]
[
admin-profile
] [
asynchronous
|
synchronous
] [
parallel-reload
] [
prompt-level
{
default
|
none
}] [
test
]
EXEC Mode
install rollback to
{
point-id
|
label
|
committed
} [
auto-abort-timer
time
] [
asynchronous
|
synchronous
] [
parallel-reload
] [
prompt-level
{
default
|
none
}] [
test
]
Syntax Description
Defaults
The operation is performed in asynchronous mode. The
install rollback to
command runs in the
background, and the EXEC prompt is returned as soon as possible.
point-id
Installation point ID number.
label
Label associated with an installation point.
committed
Rolls the Cisco IOS XR software back to the last committed installation
point.
auto-abort-timer
time
(Optional) Specifies an abort timer value,
time
, in minutes, which when
expired loads the last committed loadpath.
sdr
OWNER
(Optional) Rolls back the software set for a specific secure domain
router (SDR). The only SDR available is
OWNER
, which refers to the
entire Cisco ASR 14000 Series Router router.
admin-profile
(Optional) Rolls back the active software set on the admin profile only.
This option is in administration EXEC mode only.
asynchronous
(Optional) Performs the command in asynchronous mode. In
asynchronous mode, this command runs in the background, and the
EXEC prompt is returned as soon as possible. This is the default mode.
synchronous
(Optional) Performs the command in synchronous mode. This mode
allows the installation process to finish before the prompt is returned.
parallel-reload
(Optional) Forces all cards on the router to reload at the same time and
then come up with the new software, rather than proceeding according
to the option encoded in the install package.
prompt-level
{
default
|
none
}
(Optional) Specifies when you are prompted for input during the
procedure.
•
default
—You are prompted only when input is required by the
operation.
•
none
—You are never prompted.
test
(Optional) Verifies the effects of proposed operations without making
changes to the Cisco IOS XR software.
