Circuitmess MAKERbuino, Руководство по сборке

Страница: 4 / 32

What’s in the box?
You’ve got your MAKERbuino box, awesome! Thank you for supporting our project!
First of all, follow the list of included components and the text below and make sure that you have all the required components laid out on
your table and ready for soldering.
If something from the list is missing, please tell us via contact@makerbuino.com. Your MAKERbuino was hand packed with love in Croatia by us
(humans), and humans make mistakes, so
everything’s possible.
List of components
Here you can find a table of your kit’s content.
The content of your kit may vary depending on the type you’ve bought (i.e. the kit with tools comes required tools and the
inventor’s pack has some extra inventor’s components included).
If you do not know what every single one of these components looks like, please don’t worry, we’ll cover every
component and its purpose in the following section after the table of content.
Label Component Name Quantity
NO LABEL MAKERbuino PCB 1
NO LABEL laser cut acrylic casing (consists of 3 pieces) 1
NO LABEL M3 nylon screws 4
NO LABEL M3 nylon nuts 4
NO LABEL M3 6mm nylon hex distancer 8
NO LABEL M2 nylon screws 2
NO LABEL M2 nylon nuts 2
NO LABEL M2 nylon spacers 2
NO LABEL 128MB Micro SD card + SD adapter 1
NO LABEL SD socket 1
NO LABEL pair of tiny RED and BLACK insulated wire for connecting the speaker 1
NO LABEL 8ohm 0.5W speaker - 28mm diameter 1
NO LABEL Li-Po battery (650mAh, single cell - 3.7V) with male JST connector 1
NO LABEL female JST battery connector (should already be mounted on the board) 1
NO LABEL USB to RS232 adapter board (serial programmer) 1
NO LABEL 6-wire male to female cable for connecting the serial adapter board
U1 ATmega328P-PU microcontroller in PDIP package 1
NO LABEL 28 pin PDIP IC socket (for the ATmega328P) 1
LCD Nokia 5110 LCD breakout board 1
NO LABEL TP4056 micro USB Li-Po battery charger board 1
IC2 3.3V voltage regulator (MCP1702-3302E in TO-92 package) 1
T1 2n2222 general purpose NPN transistor (TO-92 package) 1
Q1 16MHz crystal 1
D1 1N4148 diode 1
SWITCH1,
SWITCH2 3 pin slide toggle switch 2
C1, C6 100nF ceramic capacitor 2
C2, C3 22pF ceramic capacitor 2
C4, C5, C7 100uF, 6.3V radial electrolytic capacitor 3
BTN 12x12x7.3mm pushbutton with button cap 7
JP1 standard double row 3x2 pin angle headers (male) - for SPI port 1
JP2 standard single row 6 pin angle headers (female) - for Serial port 1
JP3, JP4 KF2510-4P angle male connector - for i2c expansion ports 2
BREAKOUT standard double row 5x2 pin angle headers (male) - for breakout port 1
TM1, TM2 1Kohm wheel trim potentiometer 2
R1 2.2Kohm resistor 1
R2, R3 10Kohm resistor 2
R4, R5 4.7kohm resistor 2
R6 100ohm resistor 1
X1 3.5mm headphone connector socket 1