CHAPTER #5
Just a couple of finishing touches
If everything electronics-related is working fine, the last
step is to put the guts (electronics) in a nice crystal clear
acrylic casing so that everyone can see your perfect
soldering joints!
Start by assembling the bottom side of the casing, which
consists of two pieces of plastic.
Next up, place the colored button caps to the yellow
pushbuttons by simply snapping them on (you will have
to apply some force and that is completely normal).
Continue by mounting the front plate and fixating it with
black hexagonal M3 spacers and nuts.
Some newer versions of the kit have a hand-strap
included.
If your kit has a hand-strap, you can now place it around
the bottom right hexagonal M3 spacer.