CHAPTER #2
Let's quickly cover the basic tools and material you'll need for assembling your MAKERbuino
You’ve
carefully read the previous section and checked that you have all the components, good job!
There are some tools and equipment that are required for the assembly and they are not included in the standard kit.
If
you’ve
bought the standard kit (not a kit with tools) and
don’t
have them, now would be a good time to borrow or purchase them.
These tools are useful whenever assembling, fixing or modifying electronic devices and should be the part of every
maker’s/hacker’s/modder’s/electrician’s equipment.
Many of these are available in a supermarket or in some professional DIY electronics stores like Radio Shack, Adafruit, Spark
fun….
Soldering iron
Any entry level ‘all
-in-
one’ soldering iron that you might find at your local hardw
are store should
work (recommended power
–
something around 30W).
It’s a good idea to upgrade to a more expensive soldering station with temperature regulation if
you plan to dive into the world of DIY electronics more thoroughly.
Solder
We highly advise buying a rosin core, 60/40 solder.
This type of solder is usually preferred by the DIY electronics community for similar
soldering projects.
Be careful when buying solder, bad solder leads to lots of complications like bad solder
joints and unwanted bridging.
Diagonal Cutter Pliers
You’ll need pliers like this to trim leads of soldered components and cut wires.
We prefer this type showed on the picture (Plato, model 170).
Standard cross screwdriver
You’ll need this one to mount the ca
sing and the LCD screen. A regular cross screwdriver
with a shaft diameter of 3mm or smaller is sufficient.
