CIAT AQUACIATPOWER CONNECT TOUCH ILD 602R, Инструкция по эксплуатации

Страница: 6 / 64

AQUACIAT
POWER
EN - 6
3.1 CONNECT TOUCH overview
The CONNECT TOUCH system manages a number of
mechanisms allowing the unit to operate effectively, including
variable speed fans control, fixed or variable speed pumps
control, etc.
The CONNECT TOUCH control system is used to control the
following types of AQUACIAT POWER range units:
AQUACIAT POWER LD Cooling-only air-cooled chillers
AQUACIAT POWER ILD Air-to-water reversible heat pumps
3.2 Features overview
Feature Cooling-only Chillers Reversible Heat Pumps
BMS connection ● ●
4.3" touch screen ● ●
Web connectivity ● ●
E-mail transmission ● ●
Occupied / Unoccupied mode management ● ●
Trending ● ●
Master/Slave control ● ●
Diagnostics ● ●
Cooling control ● ●
Free cooling (dry cooler mgmt.) ○ ○
Heating control - ●
Boiler heating control - -
Electric heating control - -
Partial heat recovery / desuperheater (option 49) ○ ○
Heat Reclaim (option 50) ○
Heat Reclaim condenser heater (option 41C) ○
Defrost mechanism - ●
Free defrost control - ●
Brine fluid ○ -
Refrigerant leak detection ○ ○
Fixed speed fans ● ●
Variable speed fans ○ ○
XtraFan ○ ○
Anti-freeze protection ○ ○
Fixed speed pump(s) ○ ○
Variable speed pump(s) ○ ○
Cooling Floor Optimization (option 119C) - ○
Hydraulic Free Cooling (option 305A/B) ○ -
Duplex unit option (2300R-4000R) - ○
Communication
Proprietary protocol ● ●
Modbus RTU or TCP/IP ● ●
BACnet IP ○ ○
LonTalk ○ ○
● Supplied as standard
○ Option
- Not available
3 - CONTROL COMPONENTS