CIAT AQUACIATPOWER CONNECT TOUCH ILD 602R, Инструкция по эксплуатации

Страница: 4 / 64

AQUACIAT
POWER
EN - 4
1.1 Safety guidelines
Installation, start-up and servicing of equipment can be
hazardous if certain factors particular to the installation are
not considered: operating pressures, electrical components,
voltages, and the installation site (elevated plinths and built-up
structures).
Only qualified installation engineers and fully trained technicians
are authorised to install and start up the equipment.
All instructions and recommendations provided in the service
guide, installation and operation manuals, as well as on tags
and labels fixed to the equipment, components and other
accompanying parts supplied separately must be read,
understood and followed.
Failure to comply with the instructions provided by the
manufacturer may result in injury or product damage.
IMPORTANT: Only qualified service engineers should be
allowed to install and service the equipment.
1.2 Safety precautions
Only personnel qualified in accordance with IEC (International
Electrotechnical Commission) recommendations may be
permitted access to electrical components.
It is particularly recommended that all sources of electricity to
the unit should be shut off before any work is begun. Shut off
the main power supply at the main circuit breaker or isolator.
IMPORTANT: The equipment uses and emits electromagnetic
signals. Tests have shown that the equipment conforms to
all applicable codes with respect to electromagnetic
compatibility.
CAUTION
RISK OF ELECTROCUTION! Even when the main circuit
breaker or isolator is switched off, specific circuits may
still be energised as they may be connected to a separate
power source.
CAUTION
RISK OF BURNS! Electrical currents may cause
components to get hot. Handle the power cable, electrical
cables and conduits, terminal box covers and motor
frames with great care.
1 - SAFETY CONSIDERATIONS