CIAT AQUACIATPOWER CONNECT TOUCH ILD 602R, Инструкция по эксплуатации

Страница: 19 / 64

EN - 19 AQUACIAT
POWER
5.7 Monitor unit parameters
The Main menu screen provides access to the main control
parameters, including general parameters, inputs and outputs
status, etc.
ƒ
To access the menu, press the Main menu button
located in the upper-left part of the Synoptic screen.
ƒ
Specific unit parameters can be accessed by pressing the
icon corresponding to the desired category.
ƒ
To go back to the Synoptic screen, press the Home button.
ƒ
Press the Up/Down buttons to navigate between the
screens.
General unit parameters
The General parameters screen provides access to a set of
general unit parameters.
ƒ
To access the General parameters screen, go to the Main
menu and select General Parameters (GENUNIT).
ƒ
Press the Up/Down buttons to navigate between the
screens.
①
Forceable point: In this example, it is used to change the unit mode
– Cooling / Heating / Automatic changeover.
5.8 Modify unit parameters
The Configuration menu gives access to a number of user-
modifiable parameters such as pump configuration, schedule
menu, etc. The Configuration menu is password-protected.
ƒ
To access the Configuration menu, press the Main menu
button located in the upper-left part of the Synoptic
screen, and then find and press Configuration Menu .
ƒ
Press the field corresponding to the parameter to be
modified and introduce all the necessary changes.
ƒ
Press the Up/Down buttons to navigate between the
screens.
ƒ
Once all the necessary modifications have been made,
press the Save button to save your changes or the Cancel
button to exit the screen without making modifications.
5.9 Override system configuration
In some cases it is possible to override system configuration.
The override screen provides the option to issue the command
overriding the current operation of the unit.
To access the override screen, press the forceable point of the
data screen. Note that not all parameters can be overridden by
the control.
①
Forced value
②
Set force
③
Auto
①
② ③
5 - CONNECT TOUCH USER INTERFACE
①