Chrysler IIIH, Инструкция по сборке

Страница: 70 / 100

1 Place the primary chain onto the crankshaft sprocket (3)
so that the arrow (2) is aligned with the plated link (1)
on the timing chain.
View from back side
2 While maintaining this alignment, invert the crankshaft
sprocket and timing chain and place the idler sprocket
(4) into the timing chain so that the dimple (2) is aligned
with the plated link (1) on the timing chain.
3 While maintaining this alignment, lubricate the idler
sprocket bushing with EF411 and install the
sprockets and timing chain on the engine. To verify that
the timing is still correct, the timing chain plated link
(6) should be located at 12:00 (1) when the dimple
(5) on the crankshaft is aligned with the block/bearing
cap junction (4).
4 Install the idler sprocket retaining bolt (2) and washer
(3). Tighten the T45 bolt (2) to 25 N ∙ m (18 ft. lbs.).
Revision 1 Section 8
Jun ‐ 18 Sheet 10
Long Block Assembly
Primary Chain Assembly