Chrysler IIIH, Инструкция по сборке

Страница: 12 / 100

Install the Driver Side Engine Lifting Bracket 10242 ‐ 1
(1) on the LH cylinder head with bolts (2) provided
with the Engine Lifting Bracket. Tighten the bolts
to 21 N ∙ m (15 ft. lbs.).
Install the Passenger Side Engine Lifting Bracket
10242 ‐ 2 (1) on the RH cylinder head with bolts (2)
from the Engine Lifting Bracket. Tighten the bolts to
21 N ∙ m (15 ft. lbs.).
Drain the factory fill engine oil from the oil pan before rotating the engine on the roll over stand.
Remove the front balancer.
Labs may also chose to fabricate in ‐ house lifting brackets. Care should be taken to ensure the brackets keep all
chains and hooks from contacting the camshaft covers. It has been found that plates attached to the exhaust
manifold fastener area work well when moving fully assembled engines.
Once positioned on the roll over stand, Remove the oil filter cap and filter cartridge, thereby allowing any oil in
the filter housing to drain to the oil pan.
Revision 1
New Engine Disassembly
Section 3
Jun ‐ 18 Sheet 3