Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 643 | Manualshive

Страница: 643 / 806

Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 643

WARNING!

(Continued)

•

Do not let anyone sit in the vehicle when it is on a
jack.

•

Do not get under the vehicle when it is on a jack. If
you need to get under a raised vehicle, take it to a
service center where it can be raised on a lift.

•

Only use the jack in the positions indicated and for
lifting this vehicle during a tire change.

•

If working on or near a roadway, be extremely
careful of motor traffic.

•

To assure that spare tires, flat or inflated, are
securely stowed, spares must be stowed with the
valve stem facing the ground.

CAUTION!

Do not attempt to raise the vehicle by jacking on
locations other than those indicated in the Jacking
Instructions for this vehicle.

1. Remove the spare wheel, jack, and tools from storage.

2. Using the wheel wrench, loosen, but do not remove,

the wheel nuts by turning them counterclockwise one
turn while the wheel is still on the ground.

Jack Warning Label

6

WHAT TO DO IN EMERGENCIES

641

«
...
641
642
643
644
645
...
»

Содержание 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов