Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 452 | Manualshive

Страница: 452 / 806

Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 452

AUTO or 4WD LOCK positions at a given road speed.
Take care not to overspeed the engine and do not exceed
25 mph (40 km/h).

Proper operation of four-wheel drive vehicles depends
on tires of equal size, type and circumference on each
wheel. Any difference in tire size can cause damage to the
drivetrain.

Because four-wheel drive provides improved traction,
there is a tendency to exceed safe turning and stopping
speeds. Do not go faster than road conditions permit.

WARNING!

You or others could be injured or killed if you leave
the vehicle unattended with the transfer case in the
NEUTRAL position without first fully engaging the
parking brake. The transfer case NEUTRAL position

(Continued)

WARNING!

(Continued)

disengages both the front and rear drive shafts from
the powertrain and will allow the vehicle to move
regardless of the transmission position. The parking
brake should always be applied when the driver is
not in the vehicle.

For additional information on the appropriate use of each
transfer case mode position, see the information below:

2WD

Rear-Wheel Drive High Range - This range is for normal
street and highway driving on dry hard surfaced roads.

4WD AUTO

Four-Wheel Drive Auto Range - This range sends power
to the rear wheels. The four – wheel drive system will be
automatically engaged when the vehicle senses a loss of
traction. Additional traction for varying road conditions.

450

STARTING AND OPERATING

«
...
450
451
452
453
454
...
»

Содержание 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов