Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 477 | Manualshive

Страница: 477 / 806

Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 477

Ramp Travel Index (RTI)

The ramp travel index is the distance, in inches, that you
can drive your vehicle with one wheel on a 20-degree
ramp without lifting any other wheel off the ground. This
distance up the ramp divided by the wheelbase of the
vehicle and multiplied by 1,000 is the RTI. This vehicle
has an RTI of 655, which means you can articulate one
front wheel 32 inches in the air while the other three
wheels remain in contact with the ground.

Water Fording Characteristics

Water fording characteristic is the vehicle’s ability to cross a
body of still water, where the powertrain and drivetrain are
safe from water ingestion. This vehicle has high water
fording characteristics with the ability to cross a pool of
water, without stopping, 24 inches deep at a maximum
speed of 10 mph (16 km/h) and a pool of water 30 inches
deep at a maximum speed of 5 mph (8 km/h), both with an
entrance ramp angle of 1.3 degrees.

CAUTION!

The door sill height is 25 inches. Water may intrude
into the interior of the vehicle at greater depths.

Simultaneous Brake And Throttle Operation

Many off-road driving conditions require the simultane-
ous use of the brake and throttle (two footed driving).
When climbing rocks, logs, or other stepped objects,
using light brake pressure with light throttle will keep the
vehicle from jerking or lurching. This technique is also
used when you need to stop and restart a vehicle on a
steep incline.

The Basics Of Off-Road Driving

You will encounter many types of terrain driving off-
road. You should be familiar with the terrain and area
before proceeding. There are many types of surface
conditions: hard packed dirt, gravel, rocks, grass, sand,

5

STARTING AND OPERATING

475

«
...
475
476
477
478
479
...
»

Содержание 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов