Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 431 | Manualshive

Страница: 431 / 806

Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 431

•

Release the shift lever and make sure it is fully seated
in the PARK gate.

•

Look at the transmission gear position display and
verify that it indicates the PARK position.

•

With brake pedal released, verify that the shift lever
will not move out of PARK.

REVERSE (R)

This range is for moving the vehicle backward. Shift into
REVERSE only after the vehicle has come to a complete
stop.

NEUTRAL (N)

Use this range when the vehicle is standing for prolonged
periods with the engine running. The engine may be
started in this range. Apply the parking brake and shift
the transmission into PARK if you must leave the vehicle.

WARNING!

Do not coast in NEUTRAL and never turn off the
ignition to coast down a hill. These are unsafe
practices that limit your response to changing traffic
or road conditions. You might lose control of the
vehicle and have a collision.

CAUTION!

Towing the vehicle, coasting, or driving for any other
reason with the transmission in NEUTRAL can cause
severe transmission damage. Refer to “Recreational
Towing” in “Starting And Operating” and “Towing A
Disabled Vehicle” in “What To Do In Emergencies”
for further information.

5

STARTING AND OPERATING

429

«
...
429
430
431
432
433
...
»

Содержание 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов