Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 806

Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 31

RKE Air Suspension (Remote Lowering Of The
Vehicle) — If Equipped

For easy entry and loading, your vehicle can be
lowered by pressing the Key Fob air suspen-
sion lowering button two times. When Remote
key FOB lowering is requested, the vehicle will

send a series of chirps and flashes to alert the customer
that the operation has begun and will continue these
alerts until it successfully lowers.

The following conditions must be met for the vehicle to
lower remotely:

•

The vehicle must not already be in Entry/Exit (Park)
ride height.

•

The vehicle battery must be fully charged.

•

All doors must be closed.

•

The ignition key must be out of the vehicle.

Cancelling Remote Lowering

Vehicle lowering can be cancelled at anytime. When
vehicle lowering is cancelled, the vehicle will raise up to
the next defined level and lock out the remote lowering
feature until the ignition has been cycled ON/OFF.

To cancel vehicle lowering, press the Key Fob air suspen-
sion lowering button one time during the lowering
process. When vehicle lowering is cancelled the horn will
chirp two times and the hazard lights will flash four
times. Once raising is completed, the horn will chirp one
time.

NOTE:

For further information, refer to “Air Suspension

System” in “Starting And Operating”.

Programming Additional Transmitters

If you do not have a programmed RKE transmitter,
contact your authorized dealer for details.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

29

«
...
29
30
31
32
33
...
»

Содержание 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов