Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 616 | Manualshive

Страница: 616 / 806

Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 616

CAUTION!

The “Lamp Out” indicator could illuminate if exte-
rior lamps are not properly installed.

Before Plowing

•

Check the hydraulic system for leaks and proper fluid
level.

•

Check the mounting bolts and nuts for proper tight-
ness.

•

Check the runners and cutting edge for excessive wear.
The cutting edge should be ¼ to ½ in (6 cm to 1.2 cm)
above ground in snow plowing position.

•

Check that snowplow lighting is connected and func-
tioning properly.

Snowplow Prep Package Model Availability

For Information about snowplow applications visit
www.ramtrucks.com or refer to the current Body Build-
ers Guide.

1. The maximum number of occupants in the truck

should not exceed two.

2. The total GVWR or the Front GAWR or the Rear

GAWR should never be exceeded.

3. Cargo capacity will be reduced by the addition of

options or passengers, etc.

The loaded vehicle weight, including the snowplow
system, all aftermarket accessories, driver, passengers,
options, and cargo, must not exceed either the Gross
Vehicle Weight (GVWR) or Gross Axle Weight (GAWR)
ratings. These weights are specified on the Safety Com-
pliance Certification Label on the driver’s side door
opening.

614

STARTING AND OPERATING

«
...
614
615
616
617
618
...
»

Содержание 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов