Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 418 | Manualshive

Страница: 418 / 806

Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 418

CAUTION!

•

Before moving the shift lever out of PARK, you
must turn the ignition switch from the OFF posi-
tion to the ON/RUN position, and also press the
brake pedal. Otherwise, damage to the shift lever
could result.

•

DO NOT race the engine when shifting from
PARK or NEUTRAL into another gear range, as this
can damage the drivetrain.

The following indicators should be used to ensure that
you have engaged the transmission into the PARK posi-
tion:

•

When shifting into PARK, pull the column-mounted
shift lever toward you and move it all the way
counterclockwise until it stops. For console-mounted
shifter, firmly move the shift lever all the way forward
and to the left until it stops.

•

Release the shift lever and make sure it is fully seated
in the PARK gate.

•

Look at the transmission gear position display and
verify that it indicates the PARK position.

•

With brake pedal released, verify that the shift lever
will not move out of PARK.

REVERSE (R)

This range is for moving the vehicle backward. Shift into
Reverse only after the vehicle has come to a complete
stop.

NEUTRAL (N)

Use this range when the vehicle is standing for prolonged
periods with the engine running. The engine may be
started in this range. Apply the parking brake and shift
the transmission into PARK if you must leave the vehicle.

416

STARTING AND OPERATING

«
...
416
417
418
419
420
...
»

Содержание 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов