Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 806

Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 50

NOTE:

If the window runs into any obstacle during the

auto-closure, it will reverse direction and then go back
down. Remove the obstacle and use the window switch
again to close the window. Any impact due to rough road
conditions may trigger the auto reverse function unex-
pectedly during auto closure. If this happens, pull the
switch lightly to the first detent and hold to close the
window manually.

WARNING!

There is no anti-pinch protection when the window
is almost closed. Be sure to clear all objects from the
window before closing.

Reset Auto-Up

Should the Auto Up feature stop working, the window
may need to be reset. To reset Auto Up:

1. Make sure the door is fully closed.

2. Pull the window switch up to close the window

completely and continue to hold the switch up for an
additional two seconds after the window is closed.

3. Push the window switch down firmly to the second

detent to open the window completely and continue
to hold the switch down for an additional two seconds
after the window is fully open.

48

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
48
49
50
51
52
...
»

Содержание 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов