Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 571 | Manualshive

Страница: 571 / 806

Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 571

NOTE:

•

The TPMS is not intended to replace normal tire care
and maintenance or to provide warning of a tire failure
or condition.

•

The TPMS should not be used as a tire pressure gauge
while adjusting your tire pressure.

•

Driving on a significantly under-inflated tire causes
the tire to overheat and can lead to tire failure.
Under-inflation also reduces fuel efficiency and tire
tread life, and may affect the vehicle’s handling and
stopping ability.

•

The TPMS is not a substitute for proper tire mainte-
nance, and it is the driver’s responsibility to maintain
correct tire pressure using an accurate tire pressure
gauge, even if under-inflation has not reached the level
to trigger illumination of the “Tire Pressure Monitor-
ing Telltale Light.”

•

Seasonal temperature changes will affect tire pressure,
and the TPMS will monitor the actual tire pressure in
the tire.

Base System

The Tire Pressure Monitor System (TPMS) uses wireless
technology with wheel rim mounted electronic sensors to
monitor tire pressure levels. Sensors mounted to each
wheel as part of the valve stem transmit tire pressure
readings to the receiver module.

NOTE:

It is particularly important for you to check the

tire pressure in all of the tires on your vehicle monthly
and to maintain the proper pressure.

The TPMS consists of the following components:

•

Receiver module,

•

Four TPM sensors, and

•

TPM Telltale Light

5

STARTING AND OPERATING

569

«
...
569
570
571
572
573
...
»

Содержание 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов