Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 474 | Manualshive

Страница: 474 / 806

Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 474

NOTE:

The axle lockers could be torque locked due to

side to side loads on the axle. Driving slowly while
turning the steering wheel from a left hand turn to a right
hand turn or driving in REVERSE for a short distance
may be required to release the torque lock and unlock the
axles.

To unlock the rear axle; move the axle locker switch to
AXLE UNLOCK. The REAR LOCK indicator light will go
out when the rear axle is unlocked.

STABILIZER/SWAY BAR SYSTEM — POWER
WAGON ONLY

Your vehicle is equipped with an electronic disconnecting
stabilizer/sway bar. This system allows greater front
suspension travel in off-road situations.

Due to the use of taller springs, this vehicle has an
increased ride height of approximately 1.9 in (48.3 mm)
in the front and 1.5 in (38.1 mm) in the rear. A major

advantage to increasing ride height is the positive effect
it has on approach/departure and break over angles.

This system is controlled by the electronic control sway
bar switch located on the instrument panel.

1 — On Road
2 — Off Road

472

STARTING AND OPERATING

«
...
472
473
474
475
476
...
»

Содержание 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов