Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 268

Страница: 268 / 806

3. Disconnect the chassis wiring harness, ensuring the

connector bracket does not fall into the sill.

4. Connect the chassis plug and bracket (provided in the

glove box) to the chassis wiring harness and insert the
bracket back into the sill.

5. Connect the tailgate plug (provided in the glove box)

to the tailgate wiring harness to ensure that the
terminals do not corrode.

6. Tape the tailgate harness and bracket against the

forward-facing surface of the tailgate. This will pre-
vent damaging the connector and bracket when stor-
ing or reinstalling the tailgate.

Removing The Tailgate

1. Disconnect the wiring harness for the rear camera and

or power locks (if equipped), refer to “Disconnecting
the Rear Camera — If Equipped” in this section.

2. Unlatch the tailgate and remove the support cables by

releasing the lock tang from the pivot.

NOTE:

Make sure tailgate is supported when removing

support cables.

Locking Tab

266

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2014 Ram Truck 1500

Отзывы:

Chrysler 2014 Ram Truck 1500, Руководство пользователя, Страница: 268 / 806

Результаты поиска

Содержание 2014 Ram Truck 1500

Отзывы: