Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 251 | Manualshive

Страница: 251 / 806

Chrysler 2014 Ram Truck 1500 Скачать руководство пользователя страница 251

NOTE:

If you are installing a Toolbox, Ladder Rack or

Headache Rack at the front of the Pickup Box, you must
use Mopar Box Reinforcement Brackets that are available
from your authorized dealer.

You can carry wide building materials (sheets of ply-
wood, etc.) by building a raised load floor. Place lumber
across the box in the indentations provided above the
wheel housings and in the bulkhead dividers to form the
floor.

WARNING!

•

The pickup box is intended for load carrying pur-
poses only, not for passengers, who should sit in
seats and use seat belts.

(Continued)

WARNING!

(Continued)

•

Care should always be exercised when operating a
vehicle with unrestrained cargo. Vehicle speeds
may need to be reduced. Severe turns or rough
roads may cause shifting or bouncing of the cargo
that may result in vehicle damage. If wide building
materials are to be frequently carried, the installa-
tion of a support is recommended. This will re-
strain the cargo and transfer the load to the pickup
box floor.

•

If you wish to carry more than 600 lbs (272 kg) of
material suspended above the wheelhouse, sup-
ports must be installed to transfer the weight of the
load to the pickup box floor or vehicle damage may
result. The use of proper supports will permit
loading up to the rated payload.

•

Unrestrained cargo may be thrown forward in an
accident causing serious or fatal injury.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

249

«
...
249
250
251
252
253
...
»

Содержание 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов