Chroma 62000D Series, Руководство по эксплуатации и программированию

Страница: 169 / 180

Appendix B List of Protection
B-3
Inter Lock(*)
Means the external
ANALOG INPUT Inter
Lock triggers full device
protection. ANALOG INPUT
Interlock triggers
the device
protection. Check if the external
ANALOG INPUT
Interlock triggers the
device protection.
FPGA_Fail(*)
Means the device
power-on initialization
of communication is
abnormal. The control board
component of the
system device is
abnormal. Check and replace
the device system
control board.
Security IC Error(*)
Means that an error is
occurred during security
IC identification. The Security IC
version is not
correct. Check if the correct
Security IC version
is correct.
Machine ID Error(*)
Means the identification
of model name (number
of modules) is wrong. 1. The firmware in
Security IC
version is wrong.
2. The Security IC
is fallen off.
3. The Security IC
is damaged.
1. Check the
firmware in
Security IC
version.
2. Check if the
Security IC is
fallen off.
3. Check if the
Security IC is
broken.
System parameter
Error(*)
Means the device
power-on initialization is
abnormal when reading
the data. 1. The firmware
in Security IC
version is wrong.
2. The system
control board is
abnormal.
1. Check the
firmware in
Security IC
version.
2. Check and
replace the
system control
board.
Boot Up Initial Error(*)
Means the device
initialization process is
abnormal. 1. The burned in
Security IC
version is
wrong.
2. The system
control board is
abnormal.
1. Check the
firmware in
Security IC
version.
2. Check and
replace the
system control
board.
AD Number Error(*)
Means the AC/DC and
DC/DC (front) modules
cannot be identified. 1. The comm.
cable of AC/DC
and DC/DC
(front) module
control board is
fallen off.
2. The control
board of AC/DC
and DC/DC
(front) module is
abnormal.
1. Check if the
comm. cable of
AC/DC and
DC/DC (front)
module control
board is fallen off.
2. Check and
replace the
control board of
AC/DC and
DC/DC (front)
module.
DD Number Error (*)
Means the DC/DC
(rear) module cannot be
recognized. 1. The comm.
cable of DC/DC
(rear) module
control board is
1. Check if the
comm. cable of
DC/DC (rear)
module control