Chroma 62000D Series, Руководство по эксплуатации и программированию

Страница: 153 / 180

Remote Operation
5-27
Description:
Queries the sequence amount of the program selected in List
mode.
Query Syntax: PROGram:MAX?
Return Parameter: None
Query Example: PROG:MAX?
Return Example: 2
–means there are two sequences under the present program.
19. PROGram:SEQuence
Description: Sets the parameters of a single sequence in List mode.
Syntax: PROGram:SEQuence
<Arg1><,><Arg2><,><Arg3><,><Arg4><,><Arg5><,><Arg6><,><
Arg7>
Parameter: <Arg1>: Sequence TYPE (0:Auto , 1:Manual , 2:EXT.Trig ,3:Skip)
<Arg2>: Sequence Voltage (NRf+ unit: voltage)
<Arg3>: Sequence Voltage Slewrate (NRf+ unit: voltage)
<Arg4>: Sequence Source Current (NRf+ unit: current)
<Arg5>: Sequence Current Slewrate (NRf+ unit: current), Source
and Load share this setting.)
<Arg6>: Sequence Load Current (NRf+ unit: current)
<Arg7>: Sequence TIME (NRf+ unit: SEC, only valid when
Sequence Type is AUTO) (
Example: PROGram:SEQuence 0,80,10,15,1, 15,10
Query Syntax: PROG:SEQ?
Return Parameter: <arg1><,><arg2><,><arg3><,><arg4><,><arg5><,><arg6><,><ar
g7>
Same as the set sequence.
Query Example: PROG:SEQ?
Return Example: 0,8.01,1.01,1.01,1.00,0,
1.010,80,10,15,1,15,1
20. PROGram:STEP:STARTV
Description: Sets the Step Mode start voltage for output.
Syntax: PROGram:STEP:STARTV <NRf+>
Parameter: <NRf+>
Example: PROGram:STEP:STARTV 20
Query Syntax: PROGram:STEP:STARTV?
Return Parameter: <NRf+>
Query Example: PROGram:STEP:STARTV?
Return Example: 2.01
21. PROGram:STEP:ENDV
Description: Sets the Step Mode end voltage for output.
Syntax: PROGram:STEP:ENDV <NRf+>
Parameter: <NRf+>
Example: PROGram:STEP:ENDV 50
Query Syntax: PROGram:STEP:ENDV?
Return Parameter: <NRf+>
Query Example: PROGram:STEP:ENDV?
Return Example: 5.01
22. PROGram:STEP:TIME
Description: Sets the execution time for Step Mode.
Syntax: PROGram:STEP:TIME <Arg1><,><Arg2><,><Arg3>
Parameter: <Arg1>: Hour (NR1) 0 ~ 99