Christini AWD 450, Руководство по обслуживанию

Страница: 31 / 118

Page 30
Maintenance
BRAKE FLUID BRAKE FLUID BRAKE FLUID BRAKE FLUID
Notice
Notice Notice
Notice
•
Avoid spilling fluid will damage the plastic or rubber parts. Place a rag
over these parts whenever the system is serviced.
•
Do not mix different types of fluid, as they are not compatible with each
other.
•
Do not allow foreign material to enter the system when filling the reservoir.
Fluid level inspection
Fluid level inspection Fluid level inspection
Fluid level inspection
When the fluid level is low, check the brake pads for wear. A low fluid level
may be due to wear of the brake pads. If the brake pads are worn, the caliper
piston is pushed out, and this accounts for a low reservoir level. If the brake
pads are not worn and the fluid level is low, check the entire system for leaks.
Front brake Front brake Front brake Front brake
•
Position the site level in the horizontal position.
•
If the level is near the low level line, check the brake pad wear.
Rear brake Rear brake Rear brake Rear brake
•
Support the motorcycle in an upright position on a level surface and check
the rear brake fluid level.
•
If the level is near the low level line, check the brake pad wear
.
BRAKE PAD WEAR BRAKE PAD WEAR BRAKE PAD WEAR BRAKE PAD WEAR
•
Check the brake pads for wear.
•
Replace the brake pads if either pad is worn to the bottom of the wear
limit groove.
Service li mit: 1.0mm
Service li mit: 1.0mm Service li mit: 1.0mm
Service li mit: 1.0mm