Christini AWD 450, Руководство по обслуживанию

Страница: 27 / 118

Page 26
Maintenance
ENGINE OIL & FILTER CHANGE
•
Run the engine for 3 minutes. Stop the engine for 3 minutes and re-
mov e the oil f ilter cap.
•
Remov e the left side engine guard.
•
Place an oil pan under the engine to catch the oil and remov e the en-
gine oil drain bolt and sealing washer to drain the engine oil.
•
Operate the kick starter pedal sev eral times while pushing the engine
stop switch , so the engine oil completely drains.
•
Remov e the bolts and oil filter cover.
•
Remov e the oil filter and spring.
•
Install the engine oil drain bolt with a new sealing washer.
•
Tighten the engine oil drain bolt to the specif ied torque.
TORQUE: 16N.m
•
Apply grease to the f ilter side of the spring end. Install the spring into
the oil filter as shown.
•
Install the oil filter with the “OUT SIDE” mark f acing out. Installing the
oil f ilter backwards will result in sev ere engine damage.
•
Apply engine oil to a new O-ring and install it to the oil filter cover.
•
Install the oil filter cover and tighten the bolt to the specified torque.
•
Fill the engine with the recommended engine oil and Install the oil f ilter
cap.
•
Start the engine and let it idle f or a few minutes.
•
Stop the engine and recheck the oil level and check f or leaks.
•
Install the engine left side guard
ENGINE OIL CAP ACITY:
0.67liter at drain
0.70liter at change