Christie DD1-WU80P, Руководство по обслуживанию

Страница: 9 / 150

7
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014) Page 7 / 118
When you replaced the MAIN PCB, SENSOR-A/
B PCB or BALLAST FAN, or when you re-
>››>&Ÿœ›„”
sure to carry out this adjustment after
re-assembling the projector and cleaning the air
A-SENS bar
A-SENS >>EXE 1:xxxx 2:xxxx 3:xxxx 4:xxxx END
Adjustment procedure
1. Display the A-SENS bar with the – and —
buttons in FACTORY MENU - VID-AD1.
2. Press the ™ button to run automatic adjustment
program. The cell END is highlighted in about 5
3. When one of the values in the cell is out of
@ #H
connection of each part.
1: 3700 ~ 4900 2: 3400 ~ 4400
3: 3000 ~ 3850 4: 2550 ~ 3250
4-2 AIR SENSOR adjustment
Test pattern for the adjustment
CW-BRI bar
CW-BRI 139
CW-CLR bar
CW-CLR 338
(You do not have to care the numbers in these
menus.)
Adjustment procedure
1. Open the ADVANCED MENU and set the
COLOR WHEEL in IMAGE SETTINGS menu to
BRIGHT.
2. Open the FACTORY MENU and display the CW-
\#–— Q>?œV
MENU - DLP.
3. K
notes of the values when horizontal stripes appear
as both of increasing and decreasing the value.
4. Set the value in the middle of the values.
Ex.: The horizontal stripes appear at the value X
as increasing the value and the value Y as
decreasing, set the value to (X+Y)/2.
5. Open the ADVANCED MENU and set the
COLOR WHEEL in IMAGE SETTINGS menu to
RICH COLOR.
6. Open the FACTORY MENU and display the CW-
?›#–— Q>?œV
MENU - DLP.
7. Set the value in the same way as CW-BRI, step 3
and 4.
4-3 INDEX DELAY adjustment
Red (255/255)