78
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014)
Page 78 / 118
䖃
POWER UNIT2 CIRCUIT
Disassembling
1) Remove 2 screws to detach the insulating lid.
2) Remove 3 screws, put the cables away from the holes
and detach POWER UNIT2 CIRCUIT from the circuit
holder.
3) Remove 3 screws to detach insulating sheets.
4) Disconnec
WD
ll the cables on the power unit.
5) Turn the unit over and separate the circuit holder and
circuit shield.
T3x12
black
screws
Insulating
lid
T3x12
black
screws
POWER UNIT2
CIRCUIT
Circuit holder
1) Attach the power shield on the circuit holder. Put the
insulation sheets and the metal mesh in place on the
holder and screw them down.
2) Connect CNPW2, CNTTS, CNPF2 and CNAC2. Screw
CNGDS down to POWER UNIT2 CIRCUIT.
3) Put POWER UNIT2 CIRCUIT on the circuit holder and
screw down.
Assembling
CNAC2
CNPF2
CNTSS
CNPW2
M4x8
Silver screw
T3x12
black
screws
Insulating
sheets
Torque: 0.68-
0.88Nm
Torque: 0.68-
0.88Nm
Torque: 0.68-
0.88Nm
CNGDS
Torque:
0.39~0.59N
䞉
m
Silver screw
POWER UNIT2
CIRCUIT
CNPW2
CNPF2
Wire CNPW2
through this hole.
Wire CNPF2 beneath
POWER UNIT1
CIRCUIT.
Circuit
holder
POWER UNIT2
CIRCUIT
Metal
mesh
Circuit shield
Circuit holder
4) Wire the cables as below.
5) Put the insulating lid on the unit and screw down.
Wire CNPF2 and
CNGDS through this
hole.
ATTENTION
Make sure these
bosses are firmly
inserted to the holes on
the insulating lid.
Circuit
holder
Содержание DD1-WU80P
