Christie DD1-WU80P, Руководство по обслуживанию

Страница: 79 / 150

77
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014) Page 77 / 118
4) Wire the cables and attach the partition as below.
Partition
Clip the partition
with the flap
POWER UNIT1
CIRCUIT
5) Attach the power unit circuit case and screw down. Put CNGDS on the holder and screw down. Wire
the cables as below.
Wire CNPW1 and CNTS
Wire CNPF2 and CNGDS
through this hole.
Wire CNPW1 and
Partition CNAWV
CNPW1 CNTS CNPF1 CNAC1
Wire CNAWV beneath
POWER UNIT1
CIRCUIT.
Wire CNPF1 beneath
POWER UNIT1
CIRCUIT.
POWER UNIT1
CIRCUIT
Wire CNPW1 and CNTS
through this hole.
Wire CNPW1 and
CNTS through this hole.
Use this groove to wire
CNPF1/2 and CNGDS
outside the case.
Power unit
circuit case
CNGDS
M4x8 silver
screw
Wire CNGDS on the right side
and CNPF1/2 on the left side.
Wire CNGDS beneath
CNPF1 and CNPF2.
Use the detent to fix
the terminal direction.
[CAUTION]
Make sure CNPF1, CNPF2, and CNGDS are not
pinched between the holder and the bottom case.
CNPF1/2
Outside View