Christie DD1-WU80P, Руководство по обслуживанию

Страница: 30 / 150

28
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014) Page 28 / 118
CAUTION
„ #
Handle the lamp cover with care because it is assembled with cooling fan.
> %
or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out
soon after you start using them. Preparation of a new lamp and early replacement are recommended.
1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes.
!› #@ #H #
cover to remove it. The lamp cover is tied to a short wire to prevent from falling. Be careful not to
•› •#@ #H #
Don’t loosen other screws at this time.
J\#•#
$
# #
6. Turn the projector on and reset the lamp time using the ADVANCED MENU.
(1) Press the MENU button to display a menu.
(2) Select as the following using the cursor button.
EASY MENU > ADVANCED MENU > SETUP > LAMP & FILTER
(3) Select LAMP-1 HOURS or LAMP-2 HOURS.
@JH*™ ‘œ¡“ \
NOTE:
* #
about the lamp.
Replacing the LAMP UNIT
3, 4
Handles
Handles
LAMP1 UNIT
(in the middle)
LAMP2 UNIT
(on the left side)
3
Lamp cover