Christie DD1-WU80P, Руководство по обслуживанию

Страница: 40 / 150

38
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014) Page 38 / 118
6-13 HIDDEN SERVICE MENU
z
BNC TERMINATION
Select the terminator of COMPUTER IN2. 75 OHM¸TTL
z
DIGITAL CONTROL
Setup for the each of HDMI1 and DVI-D ports.
1^& ¸2 : Suitable for DVD signals
z
PANEL TIME
Use time of LCD panel. Reset the PANEL TIME whenever you changed the LCD prism assembly.
z
LONG KEY
You can select the remote control button operation mode. NORMAL¸LONG
The LONG allows to control the projector with the remote control unit when you hold a button of
• KV%œ" ›œ"¢¡”V„\&>›”›œ"¢¡”V
ENABLE compulsorily. If you use these buttons to control the projector as you assigned with the
MY BUTTON menu, set to the NORMAL.
z
SOURCE SKIP DIRECT
ENABLE^ #œ*\œ"
DISABLE^\ #œ*\œ"
z
IRIS
Adjusts the dynamic iris sensitivity.
z
ERROR RECOVERY
OFF^V « # #
alert of LAMP ERROR or TEMPERATURE ERROR.
ON^V # ›>K*”œ
TEMPERATURE ERROR by holding the STANDBY/ON button for about 3 seconds. Unplug
the projector’s power cord when this operation becomes ineffective.
z
BACKLIGHT
Set the BACKLIGHT of STATUS MONITOR to NORMAL (lighting as normal operation) or FIXED ON
(always lighting).
z
PORTRAIT
NORMAL : Operates as normal mode.
OFF^K
z
SERIAL # CLEAR
”+¹”>&VK”"%\
¹ „ ++#
K>\"*? #
z
NETWORK RESET
\+ # _
z
SOFT RESET
When this is executed, all of the user data is initialized. Never use it if not required.
With the control panel With the remote control
1. Press the MENU button to
display the ADVANCED MENU.
(If EASY MENU appears,
choose ADVANCED MENU.)
2. Select the OPTION on the
menu.
•*˜
˜
INPUT buttons for 3 seconds.
1. Press the MENU button to
display the ADVANCED MENU.
(If EASY MENU appears,
choose ADVANCED MENU.)
2. Select the OPTION on the
menu.
3. Press the MAGNIFY OFF
button, then re-press and hold
the button for 3 seconds.
HIDDEN SERVICE menu