Christie CineIPM-2K, Руководство пользователя

Страница: 95 / 122

Section 6
Specifications
Cine-IPM 2K User’s Manual 6-1
020-100164-01 Rev. 1 (01/08)
NOTE: Due to continuing research, specifications are subject to change without notice.
Format
Available resolutions
NOTE:
Assumes use with CP2000. Support
may vary with other display devices.
2048 x 1080 (default)
1920 x 1080
1400 x 1050
1280 x 1024
1280 x 720
1024 x 768
Color Space Progressive RGB
Bit-per-component 8 bits or 10 bits (selectable in s/w)
Colors and Gray Scale
Default color gamut Maximum drive
Range of color temperature adjustment 3200K – 9300K
Displayable colors 1.1 billion
Gray scale resolution 10 bits each per RGB component
Gamma
Adjustable from 1.0 – 2.8 (default = 2.2 ± 0.4)
Total number of available inputs 6
(4 supplied as standard)
Analog: RGB / YPbPr
(5 BNCs at INPUT 1)
Scan format Interlaced or Progressive
Signal types / color spaces •
RGB
•
YPbPr
Horizontal frequency range 15 – 120 kHz
Vertical frequency range

23.97 – 150 Hz
Pixel clock rate 13 – 210 MHz
Active pixels per scan line (H) 640 – 2048
Active lines per field/ frame (V) 200 – 1536
A/D conversion resolution 10-bit
Input levels
R,B,G,Y — with sync
R,G,B — without sync
Pb,Pr
1.0V
p-p
±2 dB (0.79V
p-p
– 1.26V
p-p
)
0.7V
p-p
±2 dB (0.56V
p-p
– 0.88V
p-p
)
0.7V
p-p
±2 dB (0.56V
p-p
– 0.88V
p-p
)
DC offset ± 5V
Nominal impedance
75
Σ
Max. return loss (VSWR) 1.2:1 dB @ 200 MHz
 Specifies frame rate for non-interlaced sources and field rate for interlaced sources. Input frequencies higher
than the maximum panel refresh rate are displayed at a lower rate.
6.1 Specifications
Outputs for Display
X
Inputs
X