Christie CineIPM-2K, Руководство пользователя

Страница: 14 / 122

INSTALLATION AND SETUP
2-8 Cine-IPM 2K User’s Manual
020-100164-01 Rev. 1 (01/08)
If you want to use an extra video source in addition to the video source(s) connected
at
INPUT 3
or
INPUT 4
connect either a Composite or S-video source to
INPUT 1
as
shown.
NOTES: 1) Do not simultaneously connect Composite and S-video to
INPUT 1
. 2) You
can switch between video sources connected at
INPUT 1
and
INPUT 3
or
INPUT 4
.
3)
Extra video is only available with models that have a BNC connector at
INPUT 3
and will not work with previous Christie models, which include a RCA connector at
INPUT 3
.
Figure 2.11. Connecting an Extra Video Source to Input 1
Optional input modules allow you to increase your total number of inputs and/or
accommodate different signal types, whether analog or digital. Install in the areas
labeled
INPUT 5
or
INPUT 6.
These interfaces include:
•
RGB 500 Input Module
•
RGB 400 Active Loop Thru Input Module
•
RGB 400 Buffered Amplifier Input Module
•
PC250 Analog Input Module
•
Serial Digital Input Module
•
Digital HDTV Module
•
DVI Input Module
•
Dual SD/HD-SDI Module
For even more sources, connect a 3
rd
-party switcher to the RS232 IN port, or, if
RS422-compatible, to any of the three RS422 ports. Note that any sources in a
switcher can be selected only at the switcher, not via the keypad or TPC.
NOTES: 1)
Connect analog HDTV signals directly to
INPUT 1
or to any other
“RGB” input module installed—the optional HDTV Input Module used in earlier
projectors is not needed or recommended.
2)
See Appendix E, Optional Input
Modules for a brief description of each interface.
Extra Video
X
Optional Inputs
X